FIELD CONTROLS CK-43 사용자 설명서

Model: CK-43 

The CK-43 is designed for use with the SWG Series Power 
Venter for controlling Natural Gas and L.P. Gas Draft Induced 
appliances. 

Control kits control the operation of SWG Power Venters. Control 
Kits can also control the operation of Field Draft Inducers and 
Combustion Air Systems. 

1) Junction box with mounted pressure switch and 

relay/timer. 

1) 1 Ft. Length of 1/4 inch aluminum tubing. 
1) 1/4 inch tubing connector 
1) Flexible conduit connector 
1) 4" MG1 Barometric Draft Control or 5" AF Barometric 

Draft Control 

 
 
 

This device MUST be installed by a qualified agency in accordance with the manufacturers installation 
instructions.  

The definition of a qualified agency is: any individual, firm, corporation or company which either in person or through a representative is 
engaged in, and is responsible for, the installation and operation of gas appliances, who is experienced in such work, familiar with all 
the precautions required, and has complied with the requirements of the authority having jurisdiction.