Avaya M-ACCF/SF 사용자 설명서

Chapter 3

Installation

Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide

43

Configuring the M-ACC Module

The M-ACC module can be configured using the text-based Command Line 
Interface (CLI) utility and the Terminal Interface. The LEC Information Table, ATM 
Access module and ATM port information can be viewed using CajunView™.
For instructions on the text-based utility, see Chapter 4. For information about the 
graphical user interfaces, see Chapter 5.
For instructions on the use of the graphical user interfaces, refer to the Manager 
User’s Guide on the CD. 

The default settings for the M-ACC module are determined by its software. These 
default settings are subject to change in newer versions of the software for the 
M-ACC module which can be downloaded from the Avaya Network Software 
Download WWW site ( 

). See the Release Notes 

for the most up-to-date default settings.

Connecting to the Serial Port

The M-ACC module has one serial port on the front of the switch for connecting a 
terminal, a terminal emulator, or a modem (future software release) using the 
supplied adapter.

Modem connection will require a modem adapter which will supplied by 

Avaya upon request (future version).

Function

Default Setting

Framing Mode

SONET

UNI

3.1

Port Speed

OC-12c

VLANs

VLAN 1, associated with ELAN 
“default”

SNMP Community

public

ATM Access Module Terminal Menu 
Interface Passwords

Junior operator: read
Senior operator: write
Administrator: admin