Avaya M-ACCF/SF 사용자 설명서

Chapter 4

X-Switch CLI & ATM Terminal Interface

Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide

55

The M-ACC stores two software versions. The version which is currently running is 
called the Primary version. A pointer (asterisk - *) shows which version is currently 
the primary one.
To set a different primary version, select option 4 from the Setup Main Menu. A 
menu similar to the following displays:

Primary Version Screen

M-ACCF   S/W Version: 4.2.2   Slot #: 5

<CR>  Refresh the screen

  0.  Return to Previous Menu

  1.  Save the Session

-----------------------------------

     Select the Primary version

     (The current primary is marked by *)

  2.   Version 1.0.3

  3. * Version 1.0.1

   >>>Enter your choice:

Once you select and save the desired primary version, you are prompted to reboot 
the M-ACC. Type y and the M-ACC will set the pointer accordingly, and reboot 
from the newly-defined primary version. If you don't wish to reboot at this time, the 
pointer is saved, but the M-ACC continues running from the old version.

You can set the M-ACC’s configuration back to its default factory settings by 
selecting item number 3 in the Module Setup Main Menu. The following 
confirmation and warning messages are displayed:

***  Set default values  ***,   Confirm [y/n]?y

***WARNING*** - Management parameters were changed. Reset the agent!!

Before exiting this session, select the option Reset the M-ACC from the Module 
Setup Main Menu.

This command is intended for use by Avaya Technical Support personnel and provides 
a comprehensive report of the status the M-ACC module of each port.