Siemens X005 사용자 설명서
Installation and Maintenance
5.3 Installation on a Standard Rail
Figure 5-2
SCALANCE X005 removing from a DIN rail (35 mm)
5.3 Installation on a Standard Rail
Installation on a SIMATIC S7-300 Standard Rail
1. Place the upper guide at the top of the SCALANCE housing in the S7 standard rail.
2. Screw the SCALANCE X005 device to the lower part of the standard rail.
3. Install the electrical connecting cables.
2. Screw the SCALANCE X005 device to the lower part of the standard rail.
3. Install the electrical connecting cables.
Uninstalling
1. First remove all connected cables.
2. Unscrew the screw fittings at the lower part of the standard rails and subsequently pull
2. Unscrew the screw fittings at the lower part of the standard rails and subsequently pull
the device away from the standard rail.
Industrial Ethernet SCALANCE X005
Commissioning Manual, A2B00051528A
Commissioning Manual, A2B00051528A
5-3