Avaya P460 사용자 설명서

다운로드
페이지 86
Chapter 4 
Avaya P460 Layer 2 Features 
P460 VLAN Table 
The P460 VLAN table includes two types of VLANs: 
•  User-configured VLANs 
•  Dynamically learnt from the incoming traffic on the “Bind to All” ports 
When the VLAN list reaches its maximum capacity it is locked. No VLANs are 
dynamically learned and it is not be possible to configure more VLANs manually. 
If this occurs, use the clear dynamic vlans CLI  command to free space in the 
VLAN list. 
Any new VLAN, either configured by you or learnt from incoming traffic, are made 
known to all the modules in the system. 
The P460 supports up to 250 VLANs in the table, both user-defined and dynamic. 
Ingress VLAN Security 
The Avaya P460 allows only packets tagged with VLANs that are configured on a 
specific port are permitted to enter the through that port. Ingress VLAN Security 
therefore allows easy implementation of security. 
VLAN CLI Commands 
In order to... 
Use the following command... 
Assign the Port VLAN ID (PVID) 
Define the port binding method 
Define a static VLAN for a port 
Configure the tagging mode of a 
port 
Create VLANs 
Display the port VLAN binding 
mode settings 
Display VLAN tagging information 
of the ports, port binding mode, 
port VLAN ID and the allowed 
VLANs on a port 
Display the VLANs configured in 
the switch. 
Avaya P460 Configuration Guide 
23