Netgear M4100 사용자 설명서
Chapter 10. ACLs
|
169
ProSafe M4100 and M7100 Managed Switches
b. Under Binding Configuration, make the following selection and enter the following
information:
•
In he ACL ID field, select 101.
•
In the Sequence Number field, enter 1.
c. Click Unit 1. The ports display.
d. Click the gray box under port 48.
A check mark displays in the box.
e. Click Apply to save the settings.
13.
Apply ACL 103 to port 24 and port 48:
a. Select Security > ACL > Advanced > IP Binding Configuration.
A screen similar to the following displays.
b. Under Binding Configuration, make the following selection and enter the following
information:
•
In the ACL ID field, select 103.
•
In the Sequence Number field, enter 2.
c. Click Unit 1. The ports display.
Configure the following ports:
•
Click the gray box under port 24. A check mark displays in the box.
•
Click the gray box under port 48. A check mark displays in the box.
d. Click Apply to save the settings.
Set up a MAC ACL with Two Rules
The example is shown as CLI commands and as a Web interface procedure.