Netgear M4100 사용자 설명서
340
|
Chapter 18. Syslog
ProSafe M4100 and M7100 Managed Switches
Show Logging
The example is shown as CLI commands and as a Web interface procedure.
CLI: Show Logging
(Netgear Switch Routing) #show logging
Logging Client Local Port
: 514
CLI Command Logging
:
disabled
Console Logging
: disabled
Console Logging Severity Filter : alert
Buffered Logging
: enabled
Syslog Logging
: enabled
Log Messages Received
: 66
Log Messages Dropped
: 0
Log Messages Relayed
: 0
Log Messages Ignored
: 0
Web Interface: Show Logging
1.
Configure the syslog.
a. From the main menu, select Monitoring > Logs > Sys Log Configuration.
b. In the Syslog Configuration, next to the Admin Status, select the Enable radio
button.
c. Click Apply.
2.
Configure the command log.