Netgear M4100 사용자 설명서
Chapter 28. PIM
|
465
ProSafe M4100 and M7100 Managed Switches
PIM-SM builds the multicast route table on each switch. The following tables show the routes
that are built after PIM-SM switches to the source-specific tree from the shared tree.
that are built after PIM-SM switches to the source-specific tree from the shared tree.
(A) #show ip mcast mroute summary
Multicast Route Table Summary
Incoming Outgoing
Source IP Group IP Protocol Interface Interface List
----------- --------- --------- --------- ---------------
192.168.1.1 225.1.1.1 PIMSM 1/0/13 1/0/1
(B) #show ip mcast mroute summary
Multicast Route Table Summary
Incoming Outgoing
Source IP Group IP Protocol Interface Interface List
----------- ---------- --------- --------- ---------------
192.168.1.1 225.1.1.1 PIMSM 1/0/10
(C) #show ip mcast mroute summary
Multicast Route Table Summary
Incoming Outgoing
Source IP Group IP Protocol Interface Interface List
------------ --------- ---------- --------- ---------------
* 225.1.1.1 PIMSM 1/0/22
192.168.1.1 225.1.1.1 PIMSM 1/0/21
(D) #show ip mcast mroute summary
Multicast Route Table Summary
Incoming Outgoing
Source IP Group IP Protocol Interface Interface List
---------- ----------- ---------- --------- ---------------
* 225.1.1.1 PIMSM 1/0/22 1/0/24
192.168.1.1 225.1.1.1 PIMSM 1/0/21 1/0/24
Web Interface: Configure PIM-SM
PIM-SM on Switch A
1.
Enable IP routing on the switch.
a. Select Routing > IP > Basic > IP Configuration.