Netgear M4100 사용자 설명서

d.  Click the gray boxes under ports 8 and 9. 

Two check marks display in the boxes.

e.  Click Apply to save the settings.

Enable Both LAGs

The example is shown as CLI commands and as a Web interface procedure.

CLI: Enable Both LAGs

By default, the system enables link trap notification.

(Console) #config

(Console) (Config)#port-channel adminmode all

(Console) (Config)#exit

At this point, the LAGs could be added to VLANs.

Web Interface: Enable Both LAGs

a. Select Switching > LAG > LAG Configuration. 

A screen similar to the following displays.

b.  Select the top check box and the check boxes for lag_10 and lag_20 are selected.

c.  In the Admin Mode field, select Enable.

d.  Click Apply to save the settings.