Netgear M4100 사용자 설명서

Now 1/0/5 appears in the Interface field at the top.

c.  Enter the following information:

In the IP Address field, enter 192.150.5.1.

In the Subnet Mask field, enter 255.255.255.0.

In the Routing Mode field, select Enable.

d.  Click Apply to save the settings.

Add a Default Route

When IP routing takes place on a switch, a routing table is needed for the switch to forward 
the packet based on the destination IP address. The route entry in the routing table can 
either be created dynamically through routing protocols like RIP and OSPF, or be manually 
created by the network administrator. The route created manually is called the static or 
default route.

A default route is used for forwarding the packet when the switch cannot find a match in the 

routing table for an IP packet. The following example shows how to create a default route.

CLI: Add a Default Route 

(FSM7338S) (Config) #ip route default?

<nexthopip> Enter the IP Address of the next router.

(FSM7328S) (Config)#ip route default 10.10.10.2

IP subnet 10.10.10.0 should be configured using either port routing 

73).

Web Interface: Add a Default Route

Select Routing > Routing Table > Basic > Route Configuration.