Avaya P550R 사용자 설명서

610-0184-095

 18

June 14, 2001

The following known problems and workarounds apply to Cajun 
P550R, P580, P880, and P882 switches that are running switch 
software, v5.2.2. If a known problem has a viable workaround, it 
immediately follows the Problem statement. If the known problem 
has no viable workaround, it is listed as a bulleted statement.

50-Series and 80-Series modules lose ARPs after you perform an 
initialization of NVRAM (

NVRAM init

).

Reboot the switch twice after performing an NVRAM init.

The following problem has no workaround: 

■

The 50-series ATM Uplink modules do not work in slot 16 or 
slot 17 if you are using an 80-Series Supervisor module in a 
Cajun P882 switch.

The following problem has no workaround

■

The “!” character, when used as part of a CLI command, is 
considered a comment by the Cajun switch software: 

If you type “!” BEFORE a CLI command, the switch 
ignores the command and returns you to the CLI prompt.

If you type “!” after a CLI command, the switch displays 
an Invalid Command or Syntax Error error message.

The options for setting flood rate limiting on 80-series, 10/100 
Ethernet modules and on 80-series, 100 Base-FX Ethernet modules 
are incorrect. The correct rates are not available from the Web Agent 
or CLI.