Q-Logic 5602 사용자 설명서

11 – Event Log Configuration

Displaying the Event Log

11-2

59183-01 A

S

Enter the 

 command to display the event log. Each message has the 

following format:

[ordinal][time_stamp][severity][message_ID][source][message_text]

[ordinal]

–A number assigned to each message in sequence since the 

last time the alarm history was cleared.

[time_stamp]

–The time the alarm was issued in the format 

day month hh:mm:ss.ms UTC yyyy. This time stamp comes from the switch 
for events that originate with the switch, and from the workstation for events 
that originate with Enterprise Fabric Suite 2007.

[severity]

–The event severity: A–Alarm, C–Critical, W–Warning, 

I–Informative.

[message_ID]

–A number that identifies the message using the following 

format: category.message_number

[source]

–The program module or application that generated the event. 

Sources include Zoning, Switch, PortApp, EPort, Management Server. 
Alarms do not include the source.

[message_text]

–The message text

The following is an example of the Show Log command:

SANbox #> show log

   [327][day month date time year][I][Eport Port:0/8][Eport State=

   E_A0_GET_DOMAIN_ID]

   [328][day month date time year][I][Eport Port: 0/8][FSPF PortUp state=0]

   [329][day month date time year][I][Eport Port: 0/8][Sending init hello]

   [330][day month date time year][I][Eport Port: 0/8][Processing EFP, oxid= 0x8]

   [331][day month date time year][I][Eport Port: 0/8][Eport State = E_A2_IDLE]

   [332][day month date time year][I][Eport Port: 0/8][EFP,WWN= 0x100000c0dd00b845,

   len= 0x30]

   [333][day month date time year][I][Eport Port: 0/8][Sending LSU oxid=0xc:type=1]

   [334][day month date time year][I][Eport Port: 0/8][Send Zone Merge Request]

   [335][day month date time year][I][Eport Port: 0/8][LSDB Xchg timer set]

You can also filter the event log display with the Show Log Display command and 
customize the messages that display automatically in the output stream.
„

„