Q-Logic 5602 사용자 설명서

다운로드
페이지 312
12 – Simple Network Management Protocol Configuration
Modifying the SNMP Configuration
12-4
59183-01 A
S
12.3
Modifying the SNMP Configuration
Enter the 
 command to modify the SNMP configuration as shown 
in the following example. Refer to 
 for SNMP parameters descriptions.
SANbox (admin) #> set setup snmp
  A list of attributes with formatting and current values will follow.
  Enter a new value or simply press the ENTER key to accept the current value.
  If you wish to terminate this process before reaching the end of the list
  press 'q' or 'Q' and the ENTER key to do so.
  Trap Severity Options
  ---------------------
  unknown, emergency, alert, critical, error, warning, notify, info, debug, mark
  SNMPEnabled         (True / False)               [True             ]
  Contact             (string, max=64 chars)       [<sysContact undefined>]
  Location            (string, max=64 chars)       [<sysLocation undefined>]
  Trap1Address        (dot-notated IP Address)     [10.20.71.15      ]
  Trap1Port           (decimal value)              [162              ]
  Trap1Severity       (see allowed options above)  [warning          ]
  Trap1Version        (1 / 2)                      [2                ]
  Trap1Enabled        (True / False)               [False            ]
  Trap2Address        (dot-notated IP Address)     [0.0.0.0          ]
  Trap2Port           (decimal value)              [162              ]
  Trap2Severity       (see allowed options above)  [warning          ]
  Trap2Version        (1 / 2)                      [2                ]
  Trap2Enabled        (True / False)               [False            ]
  Trap3Address        (dot-notated IP Address)     [0.0.0.0          ]
  Trap3Port           (decimal value)              [162              ]
  Trap3Severity       (see allowed options above)  [warning          ]
  Trap3Version        (1 / 2)                      [2                ]
  Trap3Enabled        (True / False)               [False            ]
  Trap4Address        (dot-notated IP Address)     [0.0.0.0          ]
  Trap4Port           (decimal value)              [162              ]
  Trap4Severity       (see allowed options above)  [warning          ]
  Trap4Version        (1 / 2)                      [2                ]
  Trap4Enabled        (True / False)               [False            ]
  Trap5Address        (dot-notated IP Address)     [0.0.0.0          ]
  Trap5Port           (decimal value)              [162              ]
  Trap5Severity       (see allowed options above)  [warning          ]
  Trap5Version        (1 / 2)                      [2                ]
  Trap5Enabled        (True / False)               [False            ]
  ReadCommunity       (string, max=32 chars)       [public           ]
  WriteCommunity      (string, max=32 chars)       [private          ]
  TrapCommunity       (string, max=32 chars)       [public           ]
  AuthFailureTrap     (True / False)               [False            ]
  ProxyEnabled        (True / False)               [True             ]