Q-Logic 5602 사용자 설명서
13 – Command Reference
Show Media
13-118
59183-01 A
S
Show Media
Displays transceiver operational and diagnostic information for one or more ports.
Authority
None
Syntax
show media
[port_list]
all
installed
all
installed
Keywords
[port_list]
The port or ports for which to display transceiver information. [port_list] can be a
set of port numbers and ranges delimited by spaces. For example, [0 2 10-15]
specifies ports 0, 2, 10, 11, 12, 13, 14, and 15.
set of port numbers and ranges delimited by spaces. For example, [0 2 10-15]
specifies ports 0, 2, 10, 11, 12, 13, 14, and 15.
all
Displays transceiver information for all ports.
installed
Displays transceiver information for all ports that have transceivers installed.
Notes
describes the transceiver information in the Show Media display.
NOTE:
This command requires the SANdoctor license key. To purchase a
license key, contact your authorized maintenance provider or
authorized reseller.
license key, contact your authorized maintenance provider or
authorized reseller.
Table 13-25. Transceiver Information
Information Type
Description
MediaType
Fibre Channel specification or one of the following:
NotInstalled–transceiver is not installed.
Unknown–transceiver does not have a serial ID.
NotApplicable–transceiver is not needed.
Unknown–transceiver does not have a serial ID.
NotApplicable–transceiver is not needed.
MediaVendor
Vendor name
MediaPartNumber
Vendor media part number
MediaRevision
Vender media revision level
MediaSerialNumber
Vendor media serial number
MediaSpeeds
Transmission speed capabilities