Q-Logic 5602 사용자 설명서
7 – Zoning Configuration
Managing Zones
59183-01 A
7-15
A
7.6.8
Deactivate a Zone Set
Enter the
Deactivate command to deactivate the active zone set and
disable zoning in the fabric:
SANbox #> admin start
SANbox (admin) #> zoneset deactivate
7.7
Managing Zones
Managing Zones consists of the following tasks:
All of these tasks require an Admin session and a Zoning Edit session.
7.7.1
Create a Zone
Enter the
Create command to create a new zone as shown in the following
example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zone create zone_1
SANbox (admin-zoning) #> zoning save
7.7.2
Delete a Zone
Enter the
Delete command to delete zone_1 from the zoning database as
shown in the following example:
SANbox #> admin start
SANbox (admin) #> zoning edit
SANbox (admin-zoning) #> zone delete zone_1
SANbox (admin-zoning) #> zoning save