Q-Logic 8C 사용자 설명서

5 – Diagnostics/Troubleshooting

Recovering a Switch

5-10

59042-01 A

5.

The force PROM menu displays several recovery options. To select a switch 
recovery option, press the corresponding number (displayed in option: field) 
on the keyboard and press the Enter key. 

0)  Exit

1)  Image Unpack

2)  Reset Network Config

3)  Reset Password File

4)  Copy Log Files

5)  Remove Switch Config

6)  Remake Filesystem

7)  Reset Switch

Option: 

These options and their use are described in the following sections.

This option closes the current login session. To log in again, enter the force PROM 
mode account name and password (prom, prom).

This option unpacks and installs new firmware when the current firmware has 
become corrupt. Before using this option, you must load the new firmware image 
file onto the switch. The steps to install new firmware using this option are as 
follows:

1.

Place the switch in force PROM mode. Refer to the procedure for force 
PROM mode in 

.

2.

Use FTP to load a new firmware image file onto the switch. Refer to 

. Do not unpack the 

firmware image file with the Image command.

3.

Select option 1 from the force PROM menu. When prompted for a file name 
prompt, enter the firmware image file name.

Image filename: filename

Unpacking ’filename’, please wait...

Unpackage successful.

4.

Select option 7 to reset the switch and exit force PROM mode.

This option resets the network properties to the factory default values and saves 
them on the switch. Refer to 

 for the default network configuration 

values.