Q-Logic 5802V 사용자 설명서

14 – Command Reference

Image

59263-01  A

14-41

A

Manages and installs switch firmware.

Admin session

cleanup
fetch [account_name] [ip_address] [file_source] [file_destination]
install
list
tftp [ip_address] [file_source] [file_destination]
unpack [file]

Removes all firmware image files from the switch. All firmware image files are 
removed automatically each time the switch is reset.

Retrieves image file given by [file_source] using FTP and stores it on the switch 
with the file name given by [file_destination]. The image file is retrieved from the 
host IP address given by [ip_address]. [ip_address] can be an IP address (version 
4 or 6) or a DNS host name. If an account name needs a password to access the 
FTP server, the system will prompt you for it.

Downloads firmware from a remote host to the switch, installs the firmware, then 
resets the switch to activate the firmware. This is disruptive. The command 
prompts you for the following:
„

File transfer protocol (FTP or TFTP)

„

IP address or DNS host name of the remote host

„

An account name and password on the remote host (FTP only)

„

Pathname for the firmware image file

Displays the list of image files that reside on the switch.

Retrieves image file given by [file_source] using TFTP and stores it on the switch 
with the file name given by [file_destination]. The image file is retrieved from the 
host IP address given by [ip_address]. [ip_address] can be an IP address (version 
4 or 6) or a DNS host name.