Cabletron Systems 2H33-37R 사용자 설명서
Chapter 5: Local Management
5-22
2H23-50R/2H33-37R User’s Guide
5.7.2
Setting the Subnet Mask
If the management workstation that is to receive SNMP traps from the
2H23-50R or 2H33-37R is located on a separate subnet, the subnet mask
for the 2H23-50R or 2H33-37R may need to be changed from its default.
2H23-50R or 2H33-37R is located on a separate subnet, the subnet mask
for the 2H23-50R or 2H33-37R may need to be changed from its default.
To change the subnet mask from its default, perform the following steps:
1.
Use the arrow keys to highlight the Subnet Mask field.
2.
Enter the subnet mask into this field using Dotted Decimal Notation
(DDN) format.
(DDN) format.
For example: 255.255.0.0
3.
Press ENTER. If the subnet mask is valid, the cursor returns to the
beginning of the Subnet Mask field. If the entry is not valid, the screen
displays the message “INVALID SUBNET MASK OR FORMAT
ENTERED”. Local Management does not alter the current value, but
it does refresh the Subnet Mask field with the previous value.
beginning of the Subnet Mask field. If the entry is not valid, the screen
displays the message “INVALID SUBNET MASK OR FORMAT
ENTERED”. Local Management does not alter the current value, but
it does refresh the Subnet Mask field with the previous value.
4.
Use the arrow keys to highlight the SAVE command, then press
ENTER. The warning screen shown in
ENTER. The warning screen shown in
displays.
Figure 5-11
Configuration Warning Screen
WARNING!
19601-84
YOU HAVE ELECTED TO SAVE ONE OR MORE CONFIGURATION
ITEMS THAT REQUIRE RESETTING THIS DEVICE.
ITEMS THAT REQUIRE RESETTING THIS DEVICE.
ARE YOU SURE YOU WANT TO CONTINUE?
YES
NO