Dukane 6136M 사용자 설명서

3. Convenient Features

 Projecting Your Computer’s Screen Image from the
Projector via the USB Cable (USB Display)

Using a commercially available USB cable (compatible with USB 2.0 specifications) to connect the computer with the
projector allows you to send your computer screen image to the projector for displaying. Power On/Off and source
selection of the projector can be done from your computer without connecting a computer cable (VGA).

NOTE:
• To make USB-B available on Windows XP, the Windows user account must have “Administrator” privilege.
• USB Display uses functions of Image Express Utility Lite contained on NEC Projector CD-ROM (

→ page

Starting USB Display, however, will not install Image Express Utility Lite on your computer. This is because USB Display executes

the projector’s program only.

• USB Display will not work in [NORMAL] of [STANDBY MODE]. (

→ page

)

• When USB Display is used, the sound is output from the COMPUTER AUDIO IN Mini Jack (Stereo Mini). Image and sound may

not be synchronized.

1. Start the computer.
2. Connect the projector’s power cord to the wall outlet and put the projector into standby condition.
3. Use the USB cable to connect the computer with the projector.

USB cable (not supplied)

→ To wall outlet

Power cord (supplied)

The message “The projector is in standby mode. Connect it?” will be displayed on the computer screen.

• The control window of Image Express Utility Lite will be displayed on the top of the screen.

NOTE: Depending on the computer setting, the “AutoPlay” window may be displayed when the
computer detects the connection to the projector. If this happens, click the “Start USB Display”
window.

4. Click “Yes”.
The projector will turn on and the message “The projector is getting ready. Please wait.” will be displayed on the

computer screen. This message will disappear in a few seconds.