Cabletron Systems 2E43-51R 사용자 설명서

Chapter 5: Local Management

Add or delete source port and destination port entries as follows:

Use the arrow keys to highlight the Source Port field.

Press the SPACE bar or BACKSPACE one or more times to increment 
or decrement the port number displayed in the brackets [n] until the 
appropriate port number displays.

Use the arrow keys to highlight the Destination Port field.

Use the SPACE bar or BACKSPACE to step to the appropriate port 
number for the destination port. 

Use the arrow keys to highlight the Status field.

Use the SPACE bar to select either the ADD or DEL (delete) option. 
Press ENTER. This adds or deletes the port selections made in steps 2 
and 4 and also updates the screen Source Port and Destination Port list.

Use the arrow keys to highlight SAVE at the bottom of the screen. 
Press ENTER. The message “SAVED OK” displays. This saves the 
new settings and updates the Source Port and Destination Port 
read-only fields.

The Broadcast Suppression screen, 

, allows the user to set a 

desired limit of receive broadcast frames that are switched out to the other 
ports.

To redirect more than one port, repeat steps 1 through 6 for 
each additional setting, then go to step 7 to save all the new 
settings at once. 

The Broadcast Suppression screen is not available if the 
operational mode of the device is set to SECURE FAST VLAN. 
This screen may only be used when the device is configured to 
operate as an 802.1D or 802.1Q switch.

Broadcast frames received above the threshold setting are 
dropped.