Panasonic PT-LB80NTE 사용자 설명서

J

Q

1. Use a Phillips-head screwdriver to loosen the 2 

lamp unit cover fixing screws on the back of the 
projector until the screws turn freely, and remove 
the lamp unit cover.

2. Use a Phillips-head screwdriver to loosen the 3 

lamp unit fixing screws.

3. Pull the used lamp unit gently from the projector.

 

Grip the handle and keep the lamp unit paralleled 
when you remove the lamp. Some parts of the lamp 
unit are sharpened and may cause injury.

4. Replace the new lamp unit in correct direction.
5. Press in the lamp unit until it clicks and make sure 

the unit is installed securely.

6. Tighten the 3 lamp unit fixing screws securely with 

a Phillips-head screwdriver.

7. Attach the lamp unit cover and tighten the 2 lamp 

unit cover fixing screws securely with a Phillips-
head screwdriver.

Q

1. Connect the mains lead to a mains socket, and 

switch on the projector.

2. Press the MENU button to display the menu.
3. Press F G to select OPTION and press ENTER.
4. Press F G to select LAMP RUNTIME.

5. Press and hold the ENTER button for 

approximately 3 seconds.

6. The confirmation screen will be displayed and 

select OK.

7. Reset the projector by unplugging and plug again 

the mains lead.

8. Display the LAMP RUNTIME menu again and 

confirm the duration of time is reset to “0 H”.

Lamp unit cover fixing screws

Lamp unit cover

Handles

Lamp unit 
fixing screws

Lamp unit 
fixing screws

Press here

• Be sure to install the lamp unit and attach the lamp unit cover securely. If they are not installed securely, it may cause the 

protection circuit to operate so that the power cannot be turned on.

• Do not switch the power on while the lamp unit cover removed.
• Handle the lamp unit with special care as that is a glass product. Dropping or giving a shock may cause burst or damage.

LOW

NORMAL

1820H

LAMP POWER

ALTITUDE

LAMP RUNTIME