Zebra Technologies 105SL Plus 사용자 설명서

Routine Maintenance
Adjust Printhead Pressure and Toggle Position

P1056468-002

105SLPlus™ User Guide

7/3/13

Tighten the locking nuts.

Print additional labels at 2 in.

 

(51 mm) per second by again running the PAUSE Self Test. 

(Press and hold 

PAUSE

 while turning on (I) the printer.)

Do both sides of the label print at the same level of gray?

Yes

The toggles are positioned correctly. Increase the darkness setting to the 
optimum level for the media being used.

No

Readjust the position of the toggle or toggles toward the side that printed 
lighter.

Print additional labels at 2 in.

 

(51 mm) per second by again running the 

PAUSE Self Test. (Press and hold 

PAUSE

 while turning on (I) the printer.)

Repeat this step until both sides of the label print at the same level of gray.

Increase the darkness setting to the optimum level for the media being used.