Zebra Technologies GX420t 사용자 설명서

Printer Options
Cutter Option

54

980612-001 Rev. A

GX420t / GX430t User Guide

12/14/07

Cutter Option

The printer supports two factory installed media cutter options for full width cutting of label 
liner, tag or receipt media. These cutter options are all supported in a single cutter housing 
design. The type of cutter option installed in y our printer can be verified by printing a printer 
configuration status label. The cutter options are:

•

A medium duty cutter  for cutting label liner and light tag media (LINER/TAG)
Maximum Paper Weight (thickness): up to 180 g/m2 (0.0077 in.)
Life*: 2 million cuts: 0.5 mil to 5 mil stock (10-120 g/m2)

1 million cuts: 5 mil to 7.5 mil stock (120-180 g/m2)

750,000 cuts: 7.5 mil to 10 mil (180-200 g/m2)

* - Exceeding the maximum media weight (density/hardness) and thickness will 

shorten the cutters usable life or can cause the cutter to fail (jam or other error).

•

Cut Width: 4.25 inches (108 mm) maximum to 0.75 inches (19 mm) minimum

•

Minimum distance between cuts (label length): 1 inch (25.4 mm). Cutting shorter 
media lengths between the cuts may  cause the cutter to jam or error.

•

By default, the cutter operations include a self cleaning preventive maintenance 
cleaning cut after every  twenty -fifth cut. This feature can be disabled via ZPL or EPL 
SGD (Set/Get/DO) programming command (

cutter.clean_cutter) but is not 

recommended.

Warning • There are no operator serviceable parts in the cutter unit. N ever remove the 
cutter cover (bezel). Never attempt to insert objects or fingers in to the cutter mechanism.

Important • Tools, cotton swabs, solvents (including alcohol), etc. all may  damage or shorten 
the cutter’s usable life or cause the cutter to jam.