Zebra Technologies P120i 사용자 설명서
980504-001 Rev. A
P120i Card Printer User Guide
61
Appendix A
Encoder
Magnetic Card Stripe Encoder
This section contains information on the additional operations of the P120
i Printers with
Magnetic Card Stripe Encoder.
Introduction
Operation and maintenance requirements for the P120
i Printer with the optional magnetic card
stripe encoder. The magnetic encoder can be set for either high or low coercivity.
Media Loading Orientation
The magnetic encoder is a factory installed item with the read/write head positioned below the
card path, available with HICO or LOCO encoding.
card path, available with HICO or LOCO encoding.
When loading cards with magnetic stripes into the card feeder, please ensure that the magnetic
stripe is facing the left side of the printer, and closest to the bottom edge of the card feeder.
stripe is facing the left side of the printer, and closest to the bottom edge of the card feeder.
Caution • ONLY USE cards that comply with ISO 7810 & 7811 standards for
magnetic stripe cards. The magnetic stripe must be flush to the surface of the card
to work properly. Never use cards which have taped-on magnetic stripes.
magnetic stripe cards. The magnetic stripe must be flush to the surface of the card
to work properly. Never use cards which have taped-on magnetic stripes.
Note •
Zebra approved HICO & LOCO PVC cards are available. (Reference P120
i
printer Media List).