Savin C3528 사용자 설명서
Polling Transmission
49
3
B Enter the 4 character Polling ID
with letter keys/ number keys.
Note
❒ If you make a mistake, press
the
{Clear/Stop} key and try
again.
0000 and FFFF is not available.
C Press [S
S
S
SFile] and specify wheth-
er to save the stored original.
Each time you press the key, the
text at the middle right corner of
the display toggles between
“Save” and “Use once”.
Each time you press the key, the
text at the middle right corner of
the display toggles between
“Save” and “Use once”.
Note
❒ To delete the original imme-
diately after transmission, se-
lect “Use once”.
lect “Use once”.
❒ To repeatedly send the origi-
nal, select “Save”.
E
Press [OK].
The Transmission Mode menu is
shown. A check mark is added to
“Polling TX”.
The Transmission Mode menu is
shown. A check mark is added to
“Polling TX”.
Note
❒ To cancel the Polling Transmis-
sion, press [Cancel]. The Trans-
mission Mode menu is shown.
mission Mode menu is shown.
F
Press [Exit].
The initial display is shown.
The initial display is shown.
Note
❒ “Polling TX” is displayed. If
you set up another advanced
transmission function (except
Polling Reception), “Others” is
displayed.
transmission function (except
Polling Reception), “Others” is
displayed.
G
Press the
{{{{Start}}}} key.
Polling Transmission Clear
Report
Report
This report allows you to verify
whether Polling Transmission has
taken place.
whether Polling Transmission has
taken place.
Limitation
❒ This report is not printed if the
User Parameters are set to allow
the stored originals to be repeated-
ly sent (Save).
the stored originals to be repeated-
ly sent (Save).
⇒ P.130 “Changing
the User Parameters”(Switch11,
Bit7)
Bit7)
Note
❒ This report is turned on by default.
You can turn it off if you wish.
⇒
P.130 “Changing the User Parame-
ters”(Switch11, Bit7)
ters”(Switch11, Bit7)
❒ By default, a portion of the sent im-
age is printed on the report. You
can turn this off with the User Pa-
rameters.
can turn this off with the User Pa-
rameters.
⇒ P.130 “Changing the
User Parameters”(Switch04, Bit7)
❒ You can also check the result of a
Polling Transmission with the
TCR.
TCR.
Us95-4.tif
Us95-6.tif
Us96-1.tif
Us96-2.tif