Samsung SRP - 350 사용자 설명서

7 

1-5. Connecting the Power Supply 

 

 When connecting or disconnecting the power supply from the printer, make sure that     

    the power supply is not plugged into an electrical outlet. Otherwise you may damage  

    the power supply or the printer. 

 

 If the power supply’s rated voltage and your outlet’s voltage do not match, contact your  

 dealer for assistance. Do not plug in the power cord. Otherwise, you may damage the  

 power supply or the printer. 

 

 1. Make sure that the printer’s power switch is turned off, and the power supply’s power  

  cord is unplugged from the electrical outlet. 

 

 2. Check the label on the power supply to make sure that the voltage required by the  

  power supply matches that of your electrical outlet. 

 

 3. Plug in the power supply’s cable as shown below. Notice that the flat side of the plug  

 faces down. 

 

 

 

 

 

 

 

 

 

 

Notes : To remove the DC cable connector, make sure that the power supply’s power  

  cord is unplugged; then grasp the connector at the arrow and pull it straight out.