Samsung CLX-3175FN 사용자 설명서

Loading originals and print media_ 32

Letter, A4, Legal, 

Oficio, US Folio, 

Executive, JIS B5, A5, 

A6

tray 1

All sizes supported by 

the machine

tray 1

•

Successful printing on envelopes depends upon the 

quality of the envelopes. When selecting envelopes, 

consider the following factors:

- Weight: The weight of the envelope paper should 

not exceed 90 g/m

2

 or jamming may occur.

- Construction: Prior to printing, envelopes should 

lie flat with less than 6 mm curl, and should not 

contain air.

- Condition: Envelopes should not be wrinkled, 

nicked, or otherwise damaged.

- Temperature: You should use envelopes that are 

compatible with the heat and pressure of the 

machine during operation.

•

Use only well-constructed envelopes with sharp and 

well creased folds.

•

Do not use stamped envelopes.

•

Do not use envelopes with clasps, snaps, windows, 

coated lining, self-adhesive seals, or other synthetic 

materials.

•

Do not use damaged or poorly made envelopes.

•

Be sure the seam at both ends of the envelope 

extends all the way to the corner of the envelope.

•

Envelopes with a peel-off adhesive strip or with 

more than one flap that folds over to seal must use 

adhesives compatible with the machine’s fusing 

temperature for 0.1 second. Check your machine’s 

specification to view the fusing temperature, see 

"Printer specifications" on page 69. The extra flaps 

and strips might cause wrinkling, creasing, or jams, 

and may even damage the fuser. 

•

For the best print quality, position margins no closer 

than 15 mm from the edges of the envelope.

•

Avoid printing over the area where the envelope’s 

seams meet.

•

To avoid damaging the machine, use only labels 

designed for use in laser machines.

- When selecting labels, consider the following 

factors:

- Adhesives: The adhesive material should be 

stable at your machine’s fusing temperature. 

Check your machine’s specification to view the 

fusing temperature, see "General 

specifications" on page 68.

- Arrangement: Only use labels with no exposed 

backing between them. Labels can peel off sheets 

that have spaces between the labels, causing 

serious jams.

- Curl: Prior to printing, labels must lie flat with no 

more than 13 mm of curl in any direction.

- Condition: Do not use labels with wrinkles, 

bubbles, or other indications of separation.

•

Make sure that there is no exposed adhesive 

material between labels. Exposed areas can cause 

labels to peel off during printing, which can cause 

paper jams. Exposed adhesive can also cause 

damage to machine components.

•

Do not run a sheet of labels through the machine 

more than once. The adhesive backing is designed 

for only a single pass through the machine.

•

Do not use labels that are separating from the 

backing sheet or are wrinkled, bubbled, or otherwise 

damaged.

•

Do not print on media smaller than 76 mm wide or 

356 mm long.

•

In the software application, set margins at least 

6.4 mm away from the edges of the material.