Samsung CLX-3175FN 사용자 설명서

47 _Maintenance

To maintain print and scan quality, follow the cleaning procedures below 

each time the toner cartridge is replaced or if print and scan quality 

problems occur.

Clean the cabinet of the machine with a soft lint-free cloth. You can dampen 

the cloth slightly with water, but be careful not to let any water drip onto or 

into the machine.

During the printing process, paper, toner, and dust particles can accumulate 

inside the machine. This buildup can cause print quality problems, such as 

toner specks or smearing. Cleaning the inside of the machine clears or 

reduces these problems.
1. Turn the machine off and unplug the power cord. Wait for the machine to 

cool down.

2. Using the handle, completely open the front cover.

3. Grasp the handles on the toner cartridge and pull to remove four 

cartridges from the machine.

4. Pull the waste toner container out of the machine using its handle. 

5. Pull the imaging unit out of the machine using the groove on the front of 

the imaging unit.

6. With a dry lint-free cloth, wipe away any dust and spilled toner from the 

toner cartridges area and their cavities.

•

Cleaning the cabinet of the machine with cleaning materials 

containing large amounts of alcohol, solvent, or other strong 

substances can discolor or distort the cabinet.

•

If your machine or its surrounding is contaminated with toner, we 

recommend you to use cloth or tissue dampened with water to 

clean it. If you use a vacuum cleaner, toner blown into the air may 

be harmful. 

•

Do not touch the green surface, the imaging unit with your hands 

or any other material.

•

Be careful not to scratch the surface of the imaging unit

•

If you leave the front cover open for more than a few minutes, the 

imaging unit can be exposed to light. This will cause damage to 

the imaging unit. Close the front cover should the installation need 

to be halted for any reason.

•

If toner gets on your clothing, wipe it off with a dry cloth and wash 

it in cold water. Hot water sets toner into fabric.

•

If your machine or its surrounding is contaminated with toner, we 

recommend you to use a cloth or tissue dampened with water to 

clean it. If you use a vacum cleaner, toner blows into the air then 

might be harmful to you.

After cleaning, let the machine to dry completely.