Samsung CLX-3175FN 사용자 설명서

Troubleshooting_ 58

Paper has jammed In 

the fuser area or 

around the toner 

cartridge

Clear the jam. (See "In 

T

The toner cartridge 

you have installed is 

not genuine or refilled. 

The arrow indicates 

which color toner 

cartridge.

The print quality may get 

poor if the refilled toner 

cartridge is installed, 

since its characteristics 

may significantly differ 

from the genuine. We 

recommend Samsung-

genuine color toner 

cartridge.

T

This message 

appears between 

Toner Empty and 

Toner Low status.

Replace the toner 

cartridge with a new one. 

The life of the part 

expires totally.

Replace the part with a 

new one. Call for 

service.

The life of the part 

expires soon.

See "Checking 

page 53 and call for 

service.

The life span of the 

waste toner tank has 

expired and the printer 

will stop printing until 

a new waste toner 

tank is placed into the 

machine.

Replace the waste toner 

bank with a new one. 

The scan unit is not 

securely latched.

Close the scan unit it 

locks into place.

The scanner module 

is locked

Turn the power switch 

off and on. If the problem 

persists, call for service.

There is a problem in 

SMTP authentication.

Configure the 

authentication setting.

There is a problem in 

DNS.

Configure the DNS 

setting.

There is a problem in 

POP3.

Configure the POP3 

setting.

There is a problem in 

SMTP.

Change to the available 

server.

There is a problem on 

the network interface 

card.

Configure your network 

interface card correctly.

Stop/Clear has been 

pressed during an 

operation.

Try again.

T

The toner cartridge 

has run out. The 

machine stops 

printing.

Press OK to toggle 

the message to Stop 
or Continue or Black 

Only.

W Stop X 

If the black 

toner cartridge 

is empty, 

Black Only 

message does 

not appear.

You can select the 

option among Stop, 

Continue or Black Only 

with the left/right arrow. 

If you select Stop by 

pressing OK on the 

control panel, the 

machine stops printing. 

If you select Continue, 

the machine keeps 

printing, but the quality 

cannot be guaranteed. 

If you select Black Only, 

the machine prints the 

data in black. In this 

case, the mono printing 

feature is preset in the 

printer properties.

When you copy, the 

Black Start button will 

be activated only with 

this condition.

If you do not select any, 

the machine will work as 

Stop is selected.

Replace the toner 

cartridge with a new one. 

T

The lifespan of the 

toner cartridge which 

the arrow indicates is 

reached.

This message appears 

when the toner is 

completely empty, and 

your machine stops 

printing. Replace the 

corresponding toner 

cartridge with a 

Samsung-genuine 

cartridge. (See 

cartridge" on page 50.)

T

The corresponding 

toner cartridge is 

almost empty.

Take out the toner 

cartridge and thoroughly 

shake it. By doing this, 

you can temporarily 

reestablish printing 

operations.

A problem has 

occurred in the 

transfer belt in the 

machine.

Turn the power switch 

off and on. If the problem 

persists, call for service.

There is no paper in 

the tray.

Load paper in the tray.

The paper size 

specified in the printer 

properties does not 

match the paper you 

are loading.

Load the correct paper in 

the tray.