Samsung CLX-3175FN 사용자 설명서

다운로드
페이지 219
Troubleshooting_ 66
Common Macintosh problems
The machine does 
not scan.
Check if a document is loaded into the 
machine.
Check if your machine is connected to the 
computer. Make sure if it is connected properly 
if I/O error is reported while scanning.
Check if the port is not busy. Since functional 
components of MFP (printer and scanner) 
share the same I/O interface (port), the 
situation of simultaneous access of different 
“consumer” application to the same port is 
possible. To avoid possible conflicts, only one 
of them at a time is allowed to gain control over 
the device. The other “consumer” will 
encounter “device busy” response. This can 
usually happen while starting scan procedure, 
and appropriate message box will be displayed.
To identify the source of the problem, you 
should open ports configuration and select the 
port assigned to your scanner. port’s symbol /
dev/mfp0 corresponds to LP:0 designation 
displayed in the scanners’ options, /dev/mfp1 
relates to LP:1 and so on. USB ports start at /
dev/mfp4, so scanner on USB:0 relates to /dev/
mfp4 respectively and so forth sequentially. In 
the Selected port pane you can see if the port is 
occupied by some other application. If this is 
the case, you should wait for completion of the 
current job or should press Release port 
button, if you are sure that the present port’s 
owner is not functioning properly.
Refer to Linux User’s Guide that came with your computer for further 
information on Linux error messages.
CONDITION
SUGGESTED SOLUTIONS
The printer does not 
print PDF file correctly. 
Some parts of graphics, 
text, or illustrations are 
missing.
Incompatibility between the PDF file and 
the Acrobat products:
Printing the PDF file as an image may 
solve this problem. Turn on Print As 
Image from the Acrobat printing options.
It will take longer to print when 
you print a PDF file as an image.
The document has 
printed, but the print job 
has not disappeared 
from the spooler in Mac 
OS 10.3.2.
Update your Mac OS to OS 10.3.3. or 
higher.
Some letters are not 
displayed normally 
during the Cover page 
printing.
This problem is caused because Mac OS 
cannot create the font during the Cover 
page printing. English alphabet and 
numbers are displayed normally at the 
Cover page.
Refer to Mac OS User’s Guide that came with your computer for 
further information on Mac OS error messages.
CONDITION
SUGGESTED SOLUTIONS