Canon 320 사용자 설명서

Printing from a Memory Card

„

This printer supports JPEG and TIFF images created by DCF ver. 1.0/2.0 
standard compliant digital cameras (Exif ver. 2.2/2.21 compliant).

„

This printer is equipped with two Card Slots to meet various types of memory 
cards. Refer to the illustration on right column to find the Card Slot that 
corresponds to your memory card. Check the card face and insert it gently until 
it reaches the bottom and the Access lamp turns on. The card’s end protrudes 
from the Card Slot even if it is correctly set.
You can also use the Card Slot as the memory card drive of the computer.

Turn on the printer.

See “Turning On the Printer” on page 6.

Attach a card adapter if your memory card requires one.

Insert only one memory card into the Card Slot.

Confirm that the Access lamp has lit up.

Compatible image types are limited to JPEG and TIFF only. Other image or movie 

types such as RAW images cannot be printed.

z

When Read/write mode is selected in Read/write attribute under Device 

settings by using the Operation Panel on the printer, card direct printing 

cannot be done. After using the Card Slot as the memory card drive of the 

computer, remove the memory card, then be sure to set Read/write attribute 

to Read-only mode. See “Changing the Printer Settings” on page 33.

z

When you use a computer to edit or process photos saved on a memory card, 

be sure to print them from the computer. If you print using the Operation Panel, 

the data may not be printed correctly.

When using miniSD Card, microSD 

Card, xD-Picture Card, MEMORY 

STICK Duo, MEMORY STICK PRO 

Duo, or RS-MMC, be sure to use a 

card adapter when inserting these 

cards into the Card Slot.
If one of these cards is inserted 

without an adapter, you may not be 

able to remove the card. In this 

case, see “Cannot Remove a 

Memory Card” on page 46.

z

When a memory card is inserted into the Card Slot, the Access lamp is lit. 

When this Access lamp is flashing, the printer is accessing to the memory 

card. In this case, do not touch around the Card Slot.

z

The memory card will stick out of the Card Slot, but do not force it into the slot 

any further. Doing so damages the printer and the memory card.

z

Make sure that the memory card is correctly oriented and labeled side is facing 

up before inserting it into the Card Slot. If you force the memory card into the 

Card Slot in the wrong orientation, you may damage the memory card and/or 

the printer.

For SD Secure Digital memory card, 
SDHC memory card, miniSD Card, 
microSD Card, MultimediaCard, 
MEMORY STICK, MEMORY STICK 
PRO, MEMORY STICK Duo, 
MEMORY STICK PRO Duo, and RS-
MMC

Insert the memory card into the upper 
slot with the labeled side facing up.

Lights up

For Compact 
Flash (CF) card, 
Microdrive, and 
xD-Picture Card

Insert the memory 
card into the 
downside slot with 
the labeled side 
facing up.

Lights up