Xerox 8830 사용자 설명서

Stop

Start

1

Transform

Sample

Printer
Interrupt

Store/
Recall

Batch

Sets Build

Finisher

4

5

6

7

8

9

3

0

2

 

Jobs on the WIDE FORMAT COPY SYSTEM have the following priority: 

1.  Any job currently printing 

2.  A copy job that is ready to print 

3.  A remote print job. 

If a remote print job is in progress, a copy job (one or more images 
captured by the Scanner), cannot normally use the Printer until the 
remote print job has finished.  The Printer Interrupt key enables you to 
switch the copy priority from normal to high. 

To process a copy job immediately, press the Printer Interrupt key.  The 
Printer Interrupt indicator lamp illuminates. The current pages of the 
most current remote print job are completed. Usually a maximum of two 
pages are printed. The print job is then suspended and you can run copy 
jobs. When the copy jobs are finished, you can press the Printer 
Interrupt key again.  The Printer Interrupt indicator lamp is 
extinguished.  The interrupted remote print job resumes. 

If you send no more copy jobs, press no keys, and scan no documents, 
the Printer Interrupt feature is automatically disabled after a time set by 
the PRINTER INTERRUPT timer.  Refer to "Timers" in the "Main Menu, 
CONFIGURATION" section for instructions about how to set this value.  
The default value is 1 minute.  It can be set to a value between 1 and 99 
minutes.