Pitney Bowes DM1100 사용자 설명서

When you change the printhead, you must also replace the wiper blade 
assembly.

Instructions for replacing the wiper blade assembly are included with each 
replacement and are repeated here for your convenience. 

1. From the IntelliLink® Control Center, press the Menu key.
2. Select Maintenance.
3. Select Replace Wiper Blade Assembly.

The “Preparing Wiper Blade” screen appears. During this time, the sys-
tem moves the printhead assembly back so that you can access the 
wiper blade assembly.

4. Lift the main cover and 

locate the wiper blade 
assembly. 

5. Locate the small black 

lever behind and next to 
the wiper assembly.

6. Push the lever to the 

rear of the machine to 
release the wiper. 

Wiper blade assembly