Pitney Bowes DM1100 사용자 설명서

Tape jamming in the 
cutter.

Tape pieces or paper slivers are 
blocking the knife path.

Clear pieces from the knife path. If problem 
continues, call for service.

Tape is catching on moistening 
brush.

Remove tape brush and reset in its holder to an 
appropriate lenght.

Tape jamming.

Pressure sensitive tape only:  
Adhesive is extending beyond 
tape backing.

When loading pressure sensitive tape, be sure 
entire tape edge at feed roller is covered with 
protective backing.

Leading edge of tape roll is torn or 
folded under the tape roller.

Remove tape from under roller. Cut tape for 
straight edge. Reinsert tape leading edge under 
roller and ensure it is not crimped or folded.

Jam is on tape roller.

Remove tape from roller, clear materials from 
roller path and reinsert tape.

Tape track is dirty or clogged. 
Adhesive is on track.

Call the Help Desk for help clearing the tape 
track. Refer to the Pitney Bowes Contact Infor-
mation List in the guide for more information.