Pitney Bowes DM1100 사용자 설명서
DM1100™ Digital Mailing System Operating Guide
SV62146 Rev. D
2 - 5
Parts of the
Mailing System
Mailing System
This section describes the parts of your DM1100™ mailing system and
includes:
includes:
•
The Mailing System Exterior
•
The Mailing System Interior
•
The IntelliLink® Control Center
•
The Main Screen
Mailing System
Exterior
Exterior
Refer to the diagram for the location of each component.
IntelliLink® Control Center - This contains the screen and key-
pad for communicating with the mailing machine and the built-in
postage meter (Postal Security Device).
pad for communicating with the mailing machine and the built-in
postage meter (Postal Security Device).
Main Cover - Protect moving parts and prevent foreign objects
from entering the machine. The feed cover protects the feeder.
from entering the machine. The feed cover protects the feeder.
Wet/Dry Tape Lever - Move this lever down for dry tapes or
pressure-sensitive tapes; move it up to wet gummed tapes.
pressure-sensitive tapes; move it up to wet gummed tapes.
Stacker (not shown) - This is where mail is deposited after the
postage is applied to the piece of mail. It is located on the right
side of the machine. It may be a drop stacker, or an optional
U7PS Power Stacker.
postage is applied to the piece of mail. It is located on the right
side of the machine. It may be a drop stacker, or an optional
U7PS Power Stacker.
Flats Guide - Keeps flats aligned while feeding.
Feed Rollers - Rollers that move the mail on the transport deck
into the feeder.
into the feeder.
On/Off switch - Turns the mailing system on and off. This is
located on the lower left side of the feed deck.
located on the lower left side of the feed deck.
Feed Deck - This is where you load the mail.
1
2
3
4
5
6
7
8