Pitney Bowes DM1100 사용자 설명서

Use this mode if you know what the correct amount of postage is for your 
mail and you intend to apply this postage to each piece. 

1. Press the Mode key.
2. Select Key In Postage. 
3. Key in the correct postage value using the numeric keys on the 



IntelliLink® Control Center, then press the Enter key. 

4. If you are done, place the mail on the feed deck and press the Start 

key, otherwise go to step 4.

5. If you want to change the date, add or change an advertisement or 

inscription, press the Menu key and select Meter Stamp Options. For 
more information, refer to “Selecting the Meter Stamp Options”  in this 
chapter. 

6. When finished, place the stack of mail or piece of mail on the feed deck 

and press the Start key.

7. If you are using the optional Power Stacker, we recommend you 

remove your mail in manageable stacks and not allow the deck to fill 
completely. The system will halt the stacker if it is filled to its maximum 
capacity.

The W-O-W® feature increases your productivity by weighing the piece of 
mail and applying the correct postage as it travels through the mailing 
machine.

To run mail in the W-O-W® mode: 

1. Press the Mode key. 
2. Select W-O-W® - Weigh on the Way.
3. Press the Class key and select the class. For more information, refer to 

“Selecting the Class, Carrier, Special Services or Options”  in this chap-
ter.

4. Press the Seal key and select your sealing option. 
5. Place the stack of mail on the feed deck. 
6. Press the Start key. 
7. If you are using the optional Power Stacker, we recommend you 

remove your mail in manageable stacks and not allow the deck to fill 
completely. The system will halt the stacker if it is filled to its maximum 
capacity.

WARNING! Do not lean on or disturb the system while it is process-
ing mail in this mode. It will affect the amount of postage applied to 
the mail piece.