Epson EB-G6750WU 사용자 설명서
Check
Remedy
Are the cables connected correctly?
Check that all the cables required for projection are securely connected.
s
Is an extension cable being used?
If an extension cable is used, electrical interference may affect the signals. Use the cables supplied with the projector to
check if the cables you are using may be causing the problem.
check if the cables you are using may be causing the problem.
Is the correct resolution selected?
(Only when projecting computer images)
(Only when projecting computer images)
Set the computer so that the signals being output are compatible with the projector.
s
s
Computer's documentation
Are the Sync.
and Tracking
settings adjusted correctly?
(Only when projecting computer images)
Press the [Auto] button on the remote control or the [
] button on the control panel to perform automatic adjustment.
If the images are not adjusted correctly even after performing automatic adjustment, you can also make adjustments
from the Configuration menu.
from the Configuration menu.
s
Is the Resolution set to anything other than Auto?
(Only when projecting on a split screen)
(Only when projecting on a split screen)
The image may be collapsed if the Resolution on the Configuration menu and the resolution of the projected image are
not the same.
If the image is collapsed, set the Resolution to Auto.
not the same.
If the image is collapsed, set the Resolution to Auto.
s
Signal - Resolution
The image is truncated (large) or small, the aspect is not suitable, or the image has been reversed
Check
Remedy
Have the Screen been set correctly?
Make the appropriate Screen for the screen being used.
s
Is the aspect adjusted correctly?
Press [Aspect] button, and then select the aspect according to the input signal.
s
Is a wide panel computer image being projected?
(Only when projecting computer images)
(Only when projecting computer images)
Change the setting according to the signal for the connected equipment.
s
Signal - Resolution
Is the image still being enlarged by E-Zoom?
Press the [Esc] button on the remote control to cancel E-Zoom.
s
Is Scale set to On?
Set Scale to Off on the configuration menu.
s
Problem Solving
114