Epson EB-G6750WU 사용자 설명서
ESC/VP21 Commands
You can control the projector from an external device using ESC/VP21.
Command list
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
output and a ":" is returned.
The main contents are listed below.
Item
Command
Power ON/OFF
On
PWR ON
Off
PWR OFF
Signal selection
Computer
Auto
SOURCE 1F
RGB
SOURCE 11
Component
SOURCE 14
BNC
Auto
SOURCE BF
RGB
SOURCE B1
Component
SOURCE B4
HDMI
SOURCE 30
Video
SOURCE 41
S-Video
SOURCE 42
LAN
SOURCE 53
DisplayPort
SOURCE 70
HDBaseT (EB-G6750WU only)
SOURCE 80
Item
Command
A/V Mute On/Off
On
MUTE ON
Off
MUTE OFF
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
transmit.
For more details, contact your local dealer or the nearest address provided
in the Epson Projector Contact List.
in the Epson Projector Contact List.
s
Cable layouts
Serial connection
• Connector shape: D-Sub 9-pin (male)
Monitoring and Controlling
150