Epson EB-G6750WU 사용자 설명서
c
Correct screen distortion using the distortion ring.
When correcting distortion, the area around the edges of the image
is also focused.
is also focused.
d
Turn the focus ring to focus the entire screen.
If the area around the lens axis is out of focus, fine-tune by turning
the distortion ring.
the distortion ring.
a
When using the short throw zoom lens ELPLU01, set Lens Type to
ELPLU01
ELPLU01
from the Configuration menu so that keystone correction is
performed correctly.
s
Extended - Operation - Lens Type
Adjusting the Image Position
Extend or retract the front foot to make adjustments. You can adjust the
position of the image by tilting the projector up to 10 degrees.
position of the image by tilting the projector up to 10 degrees.
A
Extend the front foot.
B
Retract the front foot.
a
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.
projector so that it only needs to be tilted at a small angle.
Adjusting the Horizontal Tilt
Extend and retract the rear feet to adjust the projector's horizontal tilt.
Installing the Projector
27