JVC DLA-M2000LU 사용자 설명서

No.51781

1-20

DLA-M2000LU

DLA-M2000LE

Connecting to Various Devices 

After all devices have been finished being connected, connect the supplied power cord. At this time, do not yet turn on the 
MAIN POWER switch.

To prevent fire and electric shock, observe the 
following:
• When you do not use devices, pull out their power cords 

from wall outlets.

• Do not connect the devices with power cords other than 

those supplied.

• Do not use mains voltage other than the power voltage 

indicated.

• Do not scar, damage, or work on the power cords. Also, do 

not put a heavy object on, heat, or stretch the power cords, 
otherwise they may be damaged.

• Do not insert or pull out the plugs with a wet hand.

• Do not turn on the projector without installing the lens unit 

(optional). Doing so can cause the lens-hole blind cover 
(black one) initially installed to be deformed by heart from 
the light-source lamp.

• Since the power requirement of the projector is high, insert 

the power plug directly into a wall outlet.

• Use the supplied power cord with the ferrite core only.
• Do not remove the ferrite core from the supplied power 

cord; Otherwise, there may be a possibility that a harmful 
interference occurs.

Remove the lens cap before using the projector.

• The lens cap is supplied with the lens unit (optional). It

should be attached to the lens when the projector is not
used.

• Do not operate the projector with the lens cap attached. 

Doing so can deform the lens cap because of the heat. A 
metallic lens cap can get hot and cause injury.

Power cord (supplied)

■

■

The following describes the basic procedure for normal use 
of the projector.

❙❙❙❙

 ] : The main power turns on and the STAND BY 

indicator comes on.

• The OPERATE indicator lights and the projected 

screen slowly appears.

• After the power is turned on, the image may be jumbled for a 

few seconds, but this is not a malfunction.

• After the indicator comes on, it can take a minute or so for 

the lamp to warm up and operate consistently.

■

• The STAND BY indicator changes to blinking, and the 

projector goes into cool-down mode. The cool-down 
mode will continue for approximately 120 seconds.

• The OPERATE button will not work for approximately 1

minute from when the light-source lamp is turned on. Use
the button after approximately 1 minute.

‡

‡

‡

‡

] : The MAIN POWER switch turns off and the 

STAND BY indicator goes off.

• Do not turn off the MAIN POWER switch during cool-down 

mode (the STAND BY indicator blinking). Turn it off after 
the STAND BY indicator becomes on (stand-by mode).

STAND BY indicator
OPERATE indicator

OPERATE button

U

T

D

W

FOCUS

–

+

ZOOM

SHIFT

VOLUME

–

+

QUICK

ALIGN.

SHUTER

–

+

EN

T

E

R

HIDE

OPERATE

PRESET

ESCAPE

DIGITAL

ZOOM

KEYSTONE

PC

+

–

VIC SELECT

MENU

FREEZE

VIDEO

RM-M2000  REMOTE  CONTROL  UNIT

OPERATE button

OPERATE

OPERATE

(Blinking)