Epson EB-Z9750U 사용자 설명서

다운로드
페이지 233
Submenu
Function
Search Access
Point
When Connection Mode is set to Advanced, you can search for
surrounding access points, and select the SSID to connect from
those access points. Depending on the access point settings, they
may not be displayed in the list. You must set security separately.
IP Settings
(This can only be set if Connection Mode is set to Advanced.)
You can make network settings.
DHCP
: Set to On to configure the network using DHCP 
. If this
is set to On, you cannot set any more addresses.
IP Address
: You can enter the IP address
 assigned to the
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask
: You can enter the Subnet Mask
 for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address
: You can enter the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display
To prevent the SSID
 from being displayed on the LAN Standby
screen, set this to Off.
IP Address Dis‐
play
To prevent the IP address
 from being displayed on the LAN
Standby screen, set this to Off.
Search  access  point  screen
Detected  access  points  are  displayed  in  a  list.  You  can  detect  up  to  30
access  points.
Submenu
Function
Refresh
Searches for the access point again.
Indicates an access point that is being connected.
Indicates the access points where security is set.
If you select an access point where security has not been set, the
Wireless LAN menu is displayed.
If you select an access point where security has been set, the
Security menu is displayed. Select a type of security according to
the security settings for the access point.
List of Functions
131