Epson 6110 사용자 설명서

Specifying the projector(s) that will respond to the remote control when multiple projectors are used

When the projector is being used together with several others, the
projector that responds to the remote control can be limited as
described below.

Setting the projector ID

Press the [Menu] button and then, from the
configuration menu, select "Extended" - "Projector
ID". s "Using the Configuration Menu"

p.30

See the guide displayed below the menu for more instructions.

• The default for the "Projector ID" is "Off". The default

for the "ID of projector to be operated" is "0". When "0"
is set, the projector can be operated with the remote
control, regardless of the "Projector ID" setting.

• When the power to the projector is turned off, the setting

made for "ID of the projector to be operated" returns to
"0", such that it can subsequently be operated from the
remote control.

Projector ID: 1

Projector ID: 2

ID of projector
to be operated: 2

Projector ID: 3

ID of projector
to be operated: 2

2: Using the remote control, set the

ID of the projector to be
operated on each of the
projectors.

1: Using the configuration menu, set a

projector ID.

After making the above setting, only the following projector(s) can be
operated with the remote control.
• Those for which the "Projector ID" and "ID of projector to be operated"

are the same. (Ex.: The second projector in the above figure)

• When "0" is set as the "ID of the projector to be operated".

Procedure

Using the remote control

Using the control panel