Epson 6110 사용자 설명서

Keystone

You can correct vertical keystone distortion in images. sQuick Start Guide

Operation Lock

You can use this to restrict operation of the projector's control panel. s

Pointer Shape

You can select the shape of the pointer. s

Pointer 1:

 Pointer 2:

 Pointer 3:

Brightness Control

You can set the lamp brightness to one of two settings. 
Select "Low" if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When "Low" is 
selected, the amount of electricity consumed is changed as follows, and fan rotation noise during projection is reduced. 
Electrical consumption: about a 18% decrease

Volume

You can adjust the volume. 

RCA Audio Input
(EMP-6110 only)

You can select whether to use the RCA audio port (L-Audio-R) as audio input for either the 
equipment connected to the Video port or the equipment connected to the S-Video port.
For example, the illustration on the right shows how the image port and the audio port are 
combined when "S-Video" is selected.

Remote Receiver

You can limit the reception of the operation signal from the remote control.
When you want to prohibit operation by remote control, or if the remote receiver has a fluorescent light too close to it , you can make settings to 
deactivate the remote receiver you do not want used or that is experiencing interference.

When you select "S-Video"