Sanyo VCC-WB4000 사용자 설명서
Network Camera (Wired LAN) Settings
Access Level Settings
When operating the network camera, you need to select an access level to either limit operations to
only the monitoring of live images or to allow menu settings to be changed as well.
The access level setting depends on the “Username” and “Password” that are typed in after the wired
LAN settings have been made. (p. 15)
The default access level is “Administrator” (ID3, 3333) which allows all operations to be carried out.
Change the username and password to the desired access level while referring to the table below.
only the monitoring of live images or to allow menu settings to be changed as well.
The access level setting depends on the “Username” and “Password” that are typed in after the wired
LAN settings have been made. (p. 15)
The default access level is “Administrator” (ID3, 3333) which allows all operations to be carried out.
Change the username and password to the desired access level while referring to the table below.
Table 1
Username/password
Access level
For Administrator access level
All operations and settings can be carried out.
Username: ID3
Password: 3333
Password: 3333
For Operator access level
Only the following buttons can be operated.
Username: ID2
Password: 2222
Password: 2222
For User access level
Only the following buttons can be operated.
Username: ID1
Password: 1111
Password: 1111
The transmission setting menu in the live image screen is
disabled.
disabled.
In order to make it easier to refer to this Instruction Manual when carrying out the various camera
operations, the usernames (
operations, the usernames (
_ID1_
,
_ID2_
and/or
_ID3_
) are indicated in the top-right corner of the page.
For example, if
_ID3_
appears, then the operation is only available at the Administrator level.
L5AM2/US (VCC-WB4000) GB 2003, 6, 6
English
– 23 –