Sanyo VCC-WB4000 사용자 설명서
Alarm Settings
External Alarm Sensor and Motion Detector Settings
1
Set “ALARM REC USE” to “NO USE”
(example).
(example).
2
Set “EXTERNAL ALARM” to “NO”
(example).
(example).
3
Set “MOTION DETECTOR” to “ON”.
The motion detector level and MOTION
DETECTOR SET screen will be displayed.
The motion detector level and MOTION
DETECTOR SET screen will be displayed.
4
Use the drop-down list box to change the
“MOTION DETECTOR LEVEL” setting
(example: “2”).
The smaller the value selected, the higher
will be the sensitivity. Refer to “Motion
Detector Level Sensitivity Setting” for
further details. (p. 38)
“MOTION DETECTOR LEVEL” setting
(example: “2”).
The smaller the value selected, the higher
will be the sensitivity. Refer to “Motion
Detector Level Sensitivity Setting” for
further details. (p. 38)
5
Set the sensor marks.
Refer to “MOTION DETECTOR SET
Settings”.
Refer to “MOTION DETECTOR SET
Settings”.
6
Set “ALARM MODE” to “OR” (example).
An alarm will then be triggered if either the
motion detector or the external alarm sensor
detects something. Refer to “
An alarm will then be triggered if either the
motion detector or the external alarm sensor
detects something. Refer to “
5
ALARM
MODE” for details. (p. 33)
7
Click the [SET] button.
8
Set “ALARM OUT”, “ALARM OUT MODE”,
“ALARM OUT TIME”, “ALARM SOUND
MODE” and “ALARM BUFFERING” in the
same way as for “External Alarm Sensor
Setting”.
“ALARM OUT TIME”, “ALARM SOUND
MODE” and “ALARM BUFFERING” in the
same way as for “External Alarm Sensor
Setting”.
1
2
3
2
3
L5AM2/US (VCC-WB4000) GB 2003, 6, 6
English
– 37 –