Sanyo VCC-WB4000 사용자 설명서
WIRELESS LAN SET Settings
Description of WIRELESS LAN
SET Screen
SET Screen
1
CURRENT CHANNEL
The transmission mode (frequency channel) that
was set for the wireless LAN device (access
point) will be displayed here automatically.
was set for the wireless LAN device (access
point) will be displayed here automatically.
2
ESS ID
This is a verification code for transmissions sent
over the wireless LAN from the camera to the
wireless LAN device.
Extended Service Set-Identifier
over the wireless LAN from the camera to the
wireless LAN device.
Extended Service Set-Identifier
3
WEP ENCIPHERMENT (Default setting:
DISABLE)
DISABLE)
This is a security function that encrypts the data
being transmitted so that it cannot be intercepted
by an unauthorized third party.
being transmitted so that it cannot be intercepted
by an unauthorized third party.
Available settings:
•
DISABLE: Encipherment is not used.
•
WEP40 (WEP64): The encryption key uses
40 bit (64 bit) data.
40 bit (64 bit) data.
•
WEP128: The encryption key uses 128 bit
data.
data.
*
128 bit encipherment provides a higher level
of security.
of security.
*
WEP: Wired Equivalent Privacy
4
ENCRYPTION KEY
Up to four types of encryption key can be set.
Rules for encryption key entry:
•
WEP40 (WEP64): The encryption key can
consist of up to 5 alphanumeric characters.
consist of up to 5 alphanumeric characters.
•
WEP128: The encryption key can consist of
up to 13 alphanumeric characters.
up to 13 alphanumeric characters.
Encipherment Settings
If you do not type in the same encryption key
that has been set for the wireless LAN device,
communication will not be possible. Make a note
of the encryption key and type it in.
that has been set for the wireless LAN device,
communication will not be possible. Make a note
of the encryption key and type it in.
Example: Encryption key 1: 1234567890000
Encryption key 2: 12345
Encryption key 3: ABCDE12345678
Encryption key 4: ABCDE
Encryption key 3: ABCDE12345678
Encryption key 4: ABCDE
1
If using encryption key 1 (or 3), select
“WEP128” from the drop-down list box.
“WEP128” from the drop-down list box.
2
Click encryption key “1”.
3
If using encryption key 2 (or 4), select
“WEP40” from the drop-down list box.
“WEP40” from the drop-down list box.
4
Click encryption key “2”.
5
Click the [SET] button.
ESS ID and the encryption key for the
camera and the wireless LAN device will be
verified.
ESS ID and the encryption key for the
camera and the wireless LAN device will be
verified.
Note:
•
If you are not using encipherment, set “WEP
ENCIPHERMENT” to “DISABLE”.
ENCIPHERMENT” to “DISABLE”.
•
If you do not type in an encryption key, the
encryption key numbers cannot be selected.
encryption key numbers cannot be selected.
1
2
2
3
4
L5AM2/US (VCC-WB4000) GB 2003, 6, 6
English
– 53 –