Sanyo VCC-WB4000 사용자 설명서
Name and Function of Each Part
CLASS 2 WIRING
PC CARD
RS-232C
ALARM IN
OUT
MODEM
PC
AC24V
DC12V
GND
1 2
ETHERNET
POWER
MONITOR
OUT
8
H
G
J
F
I
9
COM
D/N IN
8
Link indicator
This indicator illuminates when the camera is
connected to a network. It flashes while data
transmission is in progress.
The indicator switches off when the camera
is connected to a wireless LAN.
This indicator illuminates when the camera is
connected to a network. It flashes while data
transmission is in progress.
The indicator switches off when the camera
is connected to a wireless LAN.
9
Alarm/D/N (Day/Night) terminals
A
ALARM IN terminal (IN)
Connect this terminal to an infrared
sensor or similar use in external detection
of intruders.
Connect this terminal to an infrared
sensor or similar use in external detection
of intruders.
B
D/N IN terminal (D/N IN)
This can only be used when COLOR
mode is set. A device such as an infrared
sensor can be used to automatically
switch between color images and black &
white images.
This can only be used when COLOR
mode is set. A device such as an infrared
sensor can be used to automatically
switch between color images and black &
white images.
C
ALARM OUT terminal (OUT)
Connect this terminal to a buzzer or lamp
that is used to warn when an alarm is
detected by means of motion sensor or
alarm input. In addition, when the day/night
function (COLOR mode or TIMER mode) is
being used, an IR lamp or other device can
be made to illuminate when monitoring
switches to black & white images. (Output
rating: 18 V, 25 mA)
Connect this terminal to a buzzer or lamp
that is used to warn when an alarm is
detected by means of motion sensor or
alarm input. In addition, when the day/night
function (COLOR mode or TIMER mode) is
being used, an IR lamp or other device can
be made to illuminate when monitoring
switches to black & white images. (Output
rating: 18 V, 25 mA)
D
Ground terminal (COM)
F
Power supply input terminals
(AC24V, DC12V, GND)
(AC24V, DC12V, GND)
G
RS-232C connector
Use this connector to connect the camera to
a modem for transmission of data along
telephone lines, or for connecting the camera
to a computer.
Use the PC/MODEM select switch to change
the camera operation between modem and
computer operation.
Use this connector to connect the camera to
a modem for transmission of data along
telephone lines, or for connecting the camera
to a computer.
Use the PC/MODEM select switch to change
the camera operation between modem and
computer operation.
H
ETHERNET connector
Use this connector to connect the camera
directly to a computer or to a network. Use a
10Base-T or 100Base-TX (Category 5, UTP)
cable to make the connection.
Use this connector to connect the camera
directly to a computer or to a network. Use a
10Base-T or 100Base-TX (Category 5, UTP)
cable to make the connection.
I
Lens iris output connector
Connect this connector (4-pin socket) to the
lens iris plug of the automatic iris-type lens
(sold separately).
Connect this connector (4-pin socket) to the
lens iris plug of the automatic iris-type lens
(sold separately).
J
PC/MODEM select switch
Use this switch to set the function of the
RS-232C connector when connecting the
camera directly to either a modem or
computer.
Use this switch to set the function of the
RS-232C connector when connecting the
camera directly to either a modem or
computer.
Note:
•
Make sure that the camera’s power is turned
off before setting the function of the RS-232C
connector.
off before setting the function of the RS-232C
connector.
•
Using the RS-232C connector to connect the
camera to a computer is only done for
service purposes. You should not use the
PC/MODEM select switch yourself.
camera to a computer is only done for
service purposes. You should not use the
PC/MODEM select switch yourself.
ALARM IN
OUT
A
B
C
D
COM
D/N IN
L5AM2/US (VCC-WB4000) GB 2003, 6, 6
– 6 –
English