ZyXEL Communications P-2302HWL-P1 Series 사용자 설명서
P-2302HW/HWL-P1 Series User’s Guide
Chapter 22 Tools
269
When the ZyXEL Device has finished restoring the selected configuration file, the following
screen appears.
screen appears.
Figure 149 Configuration Upload Successful
The device now automatically restarts. This causes a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
operating systems, you may see the following icon on your desktop.
Figure 150 Network Temporarily Disconnected
If the ZyXEL Device’s IP address is different in the configuration file you selected, you may
need to change the IP address of your computer to be in the same subnet as that of the default
management IP address (192.168.5.1). See your Quick Start Guide or the appendices for
details on how to set up your computer’s IP address.
need to change the IP address of your computer to be in the same subnet as that of the default
management IP address (192.168.5.1). See your Quick Start Guide or the appendices for
details on how to set up your computer’s IP address.
You might have to open a new browser to log in again.
If the upload was not successful, an error screen appears.
Click Return to go back to the
.
22.2.5 Restart Screen
Use this screen to reboot the ZyXEL Device without turning the power off. To access this
screen, click Maintenance > Tools > Restart.
screen, click Maintenance > Tools > Restart.