Netgear WNCE3001-100NAS 사용자 설명서

Hardware Features

Top Panel with LED

The WNCE3001 has one LED, which indicates the power and wireless connection status.

Off

Unit is not powered on.

Solid red

Link quality is poor, based on the link rate, or the USB does not 
supply enough power.

Blinking red

If the LED blinks red at the rate of 0.5 seconds on, 0.5 seconds 
off, the firmware is corrupt. 

Solid amber

Link quality is fair, based on the link rate.

Blinking amber

System is booting up, or has been reset. The LED starts to blink 
amber after the Reset button has been pressed for more than 5 
seconds. The LED also blinks amber during a firmware upgrade.

Solid green

Unit is powered on, and the link quality is good, based on the link 
rate.

Blinking green

Boot-up is complete, but no wireless connection is established, 
so no IP address is obtained.

Rear Panel