Siemens 090-010 사용자 설명서
Industry Sector, IA&DT
SCE Training Curriculum
Page 52 of 118
To be used only at Educational and R&D Facilities
TIA Portal Module 090-010, Edition 03/2013
Unrestricted / © Siemens AG 2013. All Rights Reserved
SCE_EN_090-010_R1209_ WinCC Advanced with Runtime and TP700 Comfort Panel
8.2
Setting transfer properties
On the desktop, press the icon
Select PN/IE under Channel.
Select the Enable Transfer check box and the Remote Control check box.
The settings in the Transfer Settings window have nothing to do with the connection settings in the
WinCC project.
This means, for example, that data can be transferred between the TP700 Panel and WinCC using the
Ethernet interface, and that communication between the panel and the SIMATIC S7 controller can take
place using the MPI interface.
In our example, data is transferred between the TP700 Panel and WinCC and communication takes
place between the panel and the SIMATIC S7 controller by means of the Ethernet interface.
To set the IP address on the panel, click Properties to edit or check the network settings.
To set the MPI or PROFIBUS address on the panel, click Properties to edit or check the bus settings
after the selection of the interface.
Select the PN/IE interface.
Click OK to confirm.